AC Aceca Tool Kit

[Hector969]

Hello All,

Could anyone give me help with the tool tray in my Aceca? I have some tools, but I am not certain if even these are correct.

Many thanks

Iain

[Jam2]

I don't know if this thread is of any help.
https://www.acownersclub.co.uk/forum/index.php?topic=848.msg9138#msg9138

[ctpearce]

This doesn't look quite like the one on my 1957 Aceca Bristol (BE588) which is the same as on a 1962 Aceca Bristol I also owned. (BE817), These also have a Bristol 'bent' head spanner and a Bristol plug spanner and a wheel hammer, otherwise it's similar (presumably it's for an AC engine car but don't know why it wouldn't have the wheel hammer). The Garrington spanners are correct; you also have a space for pliers, screwdriver, brake adjuster and a rod of unknown use. I do have some photos of my tray somewhere on the computer but can't find them at present - I could take some more if useful. There was also another thread about 2014 from a chap with a replica who was making a copy tool tray but, again, I can't seem to locate it.
chris

[bbrown]

Hector,
If you need information on the correct tools please contact my friend Greg at gsb1159@pacbell.net.  Greg has an Aceca and has been down this road before.
Bert

[SpqrEddie]

Hello!
anybody would know the original weight of the copper/hide mallet?
it was a Thor number 2?
thanks!
Eddie

[kicksey]

Here is my tool kit. It is for the AC engine.  The Bristol Tool kit includes the long spark plug spanner.  I am only missing one item,  which I think/guessing  is a 5"  ratchet for the Jack?.   Let me know if you need any help
Chris

[SpqrEddie]

Thank you!
Wich is the weight of your mallet?
a Thor n.2? i think this is what i read in another post.
I have a n.1 and seems to be a bit too light for the knoc off nuts.
Eddie