Power steering, dimensions , body parts

[Cobrajet]

Looking to convert a 1969 AC 428 Frua Coupe to PAS, anybody got any idea what rack would replace the existing.
   Also looking for dimensions to straighten the distorted front panel wing and left hand a post, any help would be appreciated.
   How do I get acccess to the spares stock list for the Frua.Looking for a boot lid sills front wings, front panel
   Alan  Hobbs

[Emmanueld]

Hi Alan,
   
   Since the Frua's rack is MGB, you should look into racks used for MGB or MGC power steering conversion kits. As far as the pump is concerned, I would look at 1968 to 1973 big block mustang items. Pump, bracket and alternator bracket (Alternator will have to be moved and the header tank will have to be replaced by a Ford item like the 427 MKIII). I am not sure if they will fit without engine bay modifications. However, I don't know why you want to install power steering, the steering is quite light anyway. By replacing iron heads and manifold with aluminum items, you save about 300 Lbs up front making the steering effort even lighter.
   
   Regarding body parts, find yourself a good metalsmith and have him beat new panels. I don't think you will find any new panels anywhere!
   Good luck!
   
   
   Emmanuel

[Cobrajet]

quote:Originally posted by Emmanueld
   
Hi Alan,
   
   Since the Frua's rack is MGB, you should look into racks used for MGB or MGC power steering conversion kits. As far as the pump is concerned, I would look at 1968 to 1973 big block mustang items. Pump, bracket and alternator bracket (Alternator will have to be moved and the header tank will have to be replaced by a Ford item like the 427 MKIII). I am not sure if they will fit without engine bay modifications. However, I don't know why you want to install power steering, the steering is quite light anyway. By replacing iron heads and manifold with aluminum items, you save about 300 Lbs up front making the steering effort even lighter.
   
   Regarding body parts, find yourself a good metalsmith and have him beat new panels. I don't think you will find any new panels anywhere!
   Good luck!
   
   
   Emmanuel
   

[nikbj68]

quote:Originally posted by Emmanueld
   Hi Alan,...Regarding body parts, find yourself a good metalsmith and have him beat new panels. I don't think you will find any new panels anywhere!
   Good luck!
   Emmanuel

   

quote:Originally posted by administrator (in the "Mk I 428 body restoration/ New Mk II 428" thread.)
The ACOC has in stock quite a few original Frua body sections which are available if parts of a body shell really need replacing. They are listed on the Acedes Spares stock list on that page in the Members' Section of the website.

   So join the club to find out if your required parts are in stock!
   Nik.[:)]

[Emmanueld]

Emmanuel
   

quote:Originally posted by administrator (in the "Mk I 428 body restoration/ New Mk II 428" thread.)
The ACOC has in stock quite a few original Frua body sections which are available if parts of a body shell really need replacing. They are listed on the Acedes Spares stock list on that page in the Members' Section of the website.[/quote]
   So join the club to find out if your required parts are in stock!
   Nik.[:)]
   
   
   First time I hear about this! I will check, Good to know, Emmanuel

[Classicus]

quote:Originally posted by Cobrajet
   
Looking to convert a 1969 AC 428 Frua Coupe to PAS, anybody got any idea what rack would replace the existing.
   Also looking for dimensions to straighten the distorted front panel wing and left hand a post, any help would be appreciated.
   How do I get acccess to the spares stock list for the Frua.Looking for a boot lid sills front wings, front panel
   Alan  Hobbs
   

   
   Hi Alan [:)]
   
   Hope you don't mind me asking but just wondered what the CF number is ?

[cliffordl]

The latest ACtion club mag. lists available spares for the 428. Essentially rear end (wings, boot etc) are just about still available very little is forward of this. Plus dash boards, some trim and a few other oddities - all listed under Acedes Spares.

[administrator]

CF Number:
   C = Cobra (very similar chassis)
   F = Frua
   X = Left Hand Drive

[nikbj68]

quote:Originally posted by administrator

quote:Originally posted by Classicus
   Hi Alan [:)]
   Hope you don't mind me asking but just wondered what the CF number is ?

   
CF Number:
   C = Cobra (very similar chassis)
   F = Frua
   X = Left Hand Drive
   

   I`m guessing Cass wanted the actual chassis number, CF(X) _ _, but thanks for the definition anyway!

[Classicus]

quote:Originally posted by nikbj68
   

quote:Originally posted by administrator

quote:Originally posted by Classicus
   Hi Alan [:)]
   Hope you don't mind me asking but just wondered what the CF number is ?

   CF Number:
   C = Cobra (very similar chassis)
   F = Frua
   X = Left Hand Drive

   I`m guessing Cass wanted the actual chassis number, CF(X) _ _, but thanks for the definition anyway!

   Ah yes quite correct. My apols. Mr. Admin ! [:I]  Rescued in the nick of time.
   Cass

[Cobrajet]

quote:Originally posted by Emmanueld
   
Emmanuel

   

quote:Originally posted by administrator (in the "Mk I 428 body restoration/ New Mk II 428" thread.)
The ACOC has in stock quite a few original Frua body sections which are available if parts of a body shell really need replacing. They are listed on the Acedes Spares stock list on that page in the Members' Section of the website.

   So join the club to find out if your required parts are in stock!
   Nik.[:)]
   
   
   First time I hear about this! I will check, Good to know, Emmanuel
   
   
   
   [/quote]

[Cobrajet]

quote:Originally posted by Emmanueld
   
Emmanuel

   

quote:Originally posted by administrator (in the "Mk I 428 body restoration/ New Mk II 428" thread.)
The ACOC has in stock quite a few original Frua body sections which are available if parts of a body shell really need replacing. They are listed on the Acedes Spares stock list on that page in the Members' Section of the website.

   So join the club to find out if your required parts are in stock!
   Nik.[:)]Quite happy to join the club,
   Alan
   
   
   First time I hear about this! I will check, Good to know, Emmanuel
   
   
   
   [/quote]

[Cobrajet]

quote:Originally posted by Cobrajet
   

quote:Originally posted by Emmanueld
   
Hi Alan,
   
   Since the Frua's rack is MGB, you should look into racks used for MGB or MGC power steering conversion kits. As far as the pump is concerned, I would look at 1968 to 1973 big block mustang items. Pump, bracket and alternator bracket (Alternator will have to be moved and the header tank will have to be replaced by a Ford item like the 427 MKIII). I am not sure if they will fit without engine bay modifications. However, I don't know why you want to install power steering, the steering is quite light anyway. By replacing iron heads and manifold with aluminum items, you save about 300 Lbs up front making the steering effort even lighter.
   
   Regarding body parts, find yourself a good metalsmith and have him beat new panels. I don't think you will find any new panels anywhere!
   Good luck!
   
   
   Emmanuel
   

Emmanuel thanks for the reply, have a good metalsmith, was just hoping to get some original panels to work with.
   interesting car came in from the USA , a bit punch drunk, hit in the front wing boot and front end
   Alan[:)]
   

[Emmanueld]

I belong to the AC club, I have not found the area with the parts as of yet!
   
   Emmanuel

[nikbj68]

quote:Originally posted by Emmanueld
   
I belong to the AC club, I have not found the area with the parts as of yet!
   
   Emmanuel
   

   Manybox, I hope this works, I`m sort of paraphrasing what I`ve read elsewhere from the administrator:
   You need to go to the ACOC Homepage, log in to the box on the right using the username & password in the "ACtion" magazine, select "model directory" (or "model" from the bottom of the screen,) then use the drop-down menu to find Acedes spares.