Owner's Photo compilation

[Gus Meyjes]

That's a gorgeous 'aceca, I believe I've seen it on some website. Are you in England or state side? good to see you have an AC engine, that's what I have going in my car. did you put some paper airfileter in your car, like a K&N inside the wire mesh to make it a little safer?
   
   Gus

[59 Aceca]

Thanks for the compliment, Gus.  Your restoration is absolutely beautiful.  Can't wait to see pictures of the finished product.
   
   I'm stateside, in California.  Being a relatively new owner, I have to confess that I'm not sure what you are talking about regarding the air filters.  I would really appreciate your elaborating on the subject, as I'm sure would others.
   
   Greg

[Gus Meyjes]

AS i am now rebuilding the AC engine, The carburettors are getting serviced as well. I am going to cut down some paper airfilter, or see what K&n has to replace the oiled wire mesh inside the filters to ensure better filtration. Also i was wondering if your car has discs or drums. Mine is a 59 however I believe it was really an older car (56) titled first in 59. It has drum brakes and i am converting to front discs. Braking was dismall. Ps I'm in Michigan, not like we could meet up for a drive sometime unfortunately.
   
   Gus

[Jan_AC_MKIV_1227]

wow, that is a beatiful Aceca and I love aex125, really great stuff

[59 Aceca]

Gus,
   
   Thanks for the info on the air cleaners.  I think I will do the same.
   
   Regarding brakes, my car has the original factory front discs which seem to do a pretty good job, although I have not really put them to the test.  Yes, the distance does definitely preclude meeting up for a drive.  Too bad.
   
   Greg

[nanard289]

quote:Originally posted by terry3000me
   
Details will be included in the March edition of ACtion. Eric Gates is again organising the AC display.
   
   Terry
   

   Thanks for your information Terry. I hope to be able to participate at this meeting. After all Silverstone is not so far [;)]

[bex316]

Here are 2 pictures of BEX316.
   
   Regards,
   Jerry
   
   
   
   

[jbottini]

Gentlemen, Truly great shots of various vehicles of the mark...keep them coming. When it warms up enough to drag AK1113 out, I'll shoot some and post. jim

[Max Allan]

As nanard289 suggested, a dedicated gallery of photos with perhaps a brief mechanical specification, but devoid of "chat", would be an excellent idea.

[hawk289]

Great idea, I like the idea of a picture and specification.

[Max Allan]

IMG]
   
   
   
   
   
   Brooklands Ace. Chassis No: DX1044
   
   Documentation includes letter from AC Cars stating vehicle was exhibited at 95 Detroit Motor Show (authenticity doubted).
   
   Engine mods include: Airflow Research alloy heads, Trickflow intake manifold, Ford Racing 65mm T/B, Crane 1.7:1 ratio pedestal rr's, Ford Racing stainless headers (ceramic coated) and conversion from head bolts to ARP stud fixings.
   In addition, heads and upper/ lower intake were port matched, doweled and finish generally improved. Estimated output 300-310 bhp
   
   Extensive steering & suspension mods to improve handling and ride.
   
   Current project: conversion from auto to 6-speed manual transmission.
   
   Wish List: Twin-screw supercharger setup

[nanard289]

quote:Originally posted by Max Allan
   

   ....Current project: conversion from auto to 6-speed manual transmission...
   
   

   Max, you have a nice license plate number [;)] About your manual transmission conversion, did you find enough space to locate an additional master cylinder to drive the clutch? Engine compartment looks crammed full [:)]