Overdrive removal info

[AcecaRacer]

I race my ACECA and am rebuilding the engine.  The expected HP will be around 150.  I see no reason to keep my OD installed as I don't use it and it is very heavy.  Does anyone have any info on what to do to accomplish this?
   
   Thanks very much!
   
   Rob

[tim isles]

Just re-fit the standard tail-shaft. If I knew how to upload a picture I'd do so but if you send me your e-mail address I'll send you a picture of 'before and after' and a source for a tail-shaft if you need one.
   
   Tim Isles

[bex316]

On behalf of Tim here is the 'before and after' picture Tim refers to.
   
   Jerry
   
   

[AcecaRacer]

Thanks very much!  I assume you will need a stock drive shaft as well to adjust to the different gap.  I would like to have the contact for the tail shaft if possible.
   
   Email - bonanza55@yahoo.com
   
   Thank you!
   Rob

[AC Ace Bristol]

Rob
   
   Ron Leonard or Jim Feldman might be able to help you in USA,  In the UK there are a few people/ Company's that might have a Spare tailpiece.
   
   Might be worth e mailing Ben Yates on :-
   
   kinnertoncourt@talktalk.net
   
   As he makes up and regularly supplies and often fits Overdrive units to Aces & Acecas,  Therefor he should know who in UK & Europe has recently carried out conversion, Hence could have a tailpiece surplus to requirement.
   
   Just a thought .. [;)]
   
   Good Luck
   
   Keith ..[:)]

[AcecaRacer]

Thanks Keith!!

[AcecaRacer]

Does anyone know what the weight difference is with and without the OD?  Also, does anyone have any specs on the "J - competition O/D"?
   Thanks!
   Rob