News:

SMF - installed December 2017.
Returning members - please use the 'Forgot Password' function when logging in to the new Forum for the first time. If you have changed your email address please let me know so I can update it.

Main Menu

Reply to nanard289's question on Photo Compilation

Started by Max Allan, February 27, 2007, 12:35:58

Previous topic - Next topic

Max Allan

nanard289, to keep photo compilation free of dialogue I'm replying via new topic.  
   
   
quote:
Max, you have a nice license plate number  About your manual transmission conversion, did you find enough space to locate an additional master cylinder to drive the clutch? Engine compartment looks crammed full

   
   I've not done the conversion yet (next winter's project). I have the gearbox, flywheel, clutch etc, but still gathering remaining parts together. I would prefer hydraulic clutch operation, but to keep things a little simplier I'm going with cable operation initially with a view to changing to hydraulic later if need be. The no. plate came courtesy of my girlfriend. She got it from the club magazine a few years ago as a birthday present. Glad you like it.

nanard289

To change the gear box is always a big job. I think you will need a new trans support, a new bellhousing (if it is not include on your new tranny), a shorter shaftline with a new yoke (to fit on your 6 speed gear box) and (not sur) a new starter to comply with your new 157 teeth flywheel.
   Nex winter will be long [;)]

Max Allan

Must confess, the conversion is looking to be more of a challenge than originally anticipated and think you might be right – next winter could be long!! Apart from the points you mention, my chief concern is finding the right people to sort the exhaust system once the gearbox is fitted. The second pair of cats will have to go (no room for them) and I want a new 2-1/2 inch system made incorporating the hi-flow cats I got from the States in place of the other two. To date I've not found anyone in this area (Kent) able to mandrel bend 2-1/2 stainless and worry I'll hit a problem with emissions next MoT [:(!], despite Random Technology's assurances two of their cats will produce lower emissions than the original four.

nanard289

quote:
Originally posted by Max Allan
   
... To date I've not found anyone in this area (Kent) able to mandrel bend 2-1/2 stainless and worry I'll hit a problem with emissions next MoT [:(!]...
   

   An other way is to buy a stainless steel U bent, to cut it as long as necessary and to find a good welder to fix the problem. I have made my own exhaust headers like that.
   Here is a good place to find the parts as you want  http://performanceweldingheaders.com/matprice.htm
   You can find also in this shop some Lambda probe plugs to weld on your exhaust pipe to control your CO² emission [;)]
   
   

Max Allan

Thanks for the link, nanard289. Fortunately, I have a mate who's a brilliant welder and guess as a last resort I could get an assortment of bends from the States. But it seems ludicrous living in a so called industrial nation such as the UK it should be necessary to ship from the States simple things like pipe bends. Talking to a mate in the States a while ago about just this subject, he was amazed we had so few facilities for fabricating exhaust systems. He reckoned in the States every other exhaust shop had the equipment. To prove the point, a few weeks later he had his local exhaust centre make a new system for his Mustang powered Volvo  – time taken 3 hrs - cost less than $400!!

Emmanueld

Nanard289, I am wondering? are your the fellow who bought my PS Engineering 289 FIA wheels on E-Bay, couple of years ago? I shipped them to France somewhere in the "Vallee de Chevreuse" (and your car has "78" license plates) I don't recall exactly where, and they were going to be mounted on a Cobra Daytona!
   Just a thought! [?]
   
   Emmanuel

nanard289

quote:
Originally posted by Max Allan
   
.... But it seems ludicrous living in a so called industrial nation such as the UK it should be necessary to ship from the States simple things like pipe bends...
   

   Max, about engines and car workshops, UK is not the States, but keep in mind that France in not UK!!! You are lucky enough to live in a nice country where it is possible to find good AC specialists as well AC Owner's Club! [;)]

nanard289

quote:
Originally posted by Emmanueld
   
Nanard289, I am wondering? are your the fellow who bought my PS Engineering 289 FIA wheels on E-Bay, couple of years ago? I shipped them to France somewhere in the "Vallee de Chevreuse" (and your car has "78" license plates) I don't recall exactly where, and they were going to be mounted on a Cobra Daytona!
   Just a thought! [?]
   
   Emmanuel
   

   Hi Emmanuel, AC world is not so big! That right, 2 years ago I had bought a nice 289 FIA wheel set on e-Bay at fair price. I use this set on my Daytona replica for street use (in France, racing tyres are not legal on the street) but I have to paint in white the hub (not yet done) [;)]

nikbj68

quote:
Originally posted by Max Allan
   
...my chief concern is finding the right people to sort the exhaust system once the gearbox is fitted...
   

   
   Not sure if they are able to help, but you could enquire of:
   Mike The Pipe.
   128 Stanley Park Rd,
   Wallington, Surrey.
   Phone: 0181 669 1719.
   
   They used to get regular namechecks in the Custom Car mags I used to read!

Max Allan

nanard289
   
quote:
....but keep in mind that France in not UK!!! You are lucky enough to live in a nice country where it is possible to find good AC specialists as well AC Owner's Club!

   Thanks for you vote of confidence in the UK, but given the choice between French cuisine, French women and the AC Club.....

Max Allan

nikbj68. Surrey is not so far away (although far enough with half the exhaust cut off!))- I'll give "Mike the Pipe" a try. Thanks