News:

SMF - installed December 2017.
Returning members - please use the 'Forgot Password' function when logging in to the new Forum for the first time. If you have changed your email address please let me know so I can update it.

Main Menu

Ace/Aceca bumper end caps

Started by pjbowman, August 16, 2009, 23:56:27

Previous topic - Next topic

pjbowman

Does anyone have one or more of the end caps as used on the tubular bumpers on Aces and Acecas for sale, or know of a source? If I can buy at least one, I could get copies made.
   
   Thanks for any leads.
   
   Peter
Peter B.

AC Ace Bristol

Peter
   
   Suggest you contact  Austin Weltman,  ACOC member for many years, he  used to be ACOC official registrar for Acecas,  During which time he had various spare parts made including front and rear twin bumper sets. ( I think they were made in Stainless Steel.)
   
   He may well have a spare set of end caps or still know where to get some reproduced,  you've got nothing to loose.
   
   Austins email:-   Austin at austin 100 dot plus dot com
   
   ****    please note the Plus is plus not the plus sign (+)
   
   Keith

pjbowman

Thanks Keith, have already checked with Austin and Ron Leonard with no luck. Any other suggestions? I've tried to call Brian E. but so far have not been able to reach him.
Peter B.

aex125

Peter,
   Do you have a picture of what they look like? Maybe there is an alternative source.
   Jay

AC Ace Bristol

Peter
   
   It's a long shot, but closer to home,  Give Ron Mulacek a call
     (Chicargo)  he runs three Ace and a Aceca and has broken up a few ACs  in the past, When they were just old Sport Cars and not worth restoring.  If you haven't his details, I can email his tel no and email address tonight.
   
   In the meantime I will phone a few ACOC members to see what might be hidden in the odd drawer or cupboard in their garage or workshop.
   
   Keith

SBB

I have a few. May need some rechroming. Call me. Phone number is
   within GB, 01276 65823
   
   Simon

pjbowman

Thanks Keith and Simon! Simon, I'm traveling right now, will call you later this week. I'll take however many you have.
   
   Keith, if you can send me Ron's info I can check with him also to try and complete a set.
   
   Thanks guys!
   
   Peter
Peter B.

AC Ace Bristol

Peter
   
   Emailed you some photos and detailed drawings complete with accurate measurements of the end caps.
   
   Should sufice, so you can get a few setsand a few spares made up.
   
   Be interested to hear if they are the same as the Second Hand end caps you are getting from Simon.
   
   
   Alternatively, cut a thread in each end of the bumpertubes and make up some screw in Button end caps, could be cheaper to reproduce.
   
   Keith

pjbowman

Got the email/pics/drawings Keith, they are just what I need. Once I talk to Simon and Ron I'll see how many I need to get made up, and keep everyone posted in case anyone else needs any. As always, thanks for everyones help.
   
   Peter
Peter B.

AC Ace Bristol

Peter
   
   I have yet to master posting photos and diagramms on the Forum,  If you think the pictures and drawings could help other club members make up end caps to replace lost or damaged units, please feel free to publish them on this thread.
   
   pictures and measurements supplied by Mike Mansergh.
   
   Keith

pjbowman

Sure will Keith. Once I get home I'll follow up and see what I can get posted for all!
   
   Peter
Peter B.

AC Ace Bristol

Peter.
   
   Cheers sport,    Might just help another AC member refurbish his Aceca or Ace Bumper/s or replace that long lost end cap.
   If you are making up a few, wouldn't cost much more to run off a few spares.
   
   Worth sounding out ACOC members,  Maybe ACedes Spares could get a batch made up if the demand is there.......  If so  chrome or Stainless Steel ??
   
   Keith

pjbowman

As promised, here's the pictures and drawings of the end caps that Keith sent me. Hope they help out some others! I'll let you all know how many I track down, and if I need to get any made up will check to see who else may need some
   
   
   
   
   
   
   
   
   Peter
Peter B.

Robin A Woolmer

The following companies have end caps which might suit or could be adapted.
   
   ' www.http://oxfordhardware.co.uk 'Have 1'' diameter push in caps polished/nickel plated.
   
   'http://www.wagnercompanies.com/end_caps.aspx ' has averiety of caps to choose from.