Messages

I agree as grease can cause problems when sitting for years. Best to send and have serviced regardless. Used www.nisonger.com for my speedo that had sat for 34 years. All is well now and inexpensive for what you get!

Indeed there are. Look at whether control box on inner wing or bulkhead. Look at this website & page:
   http://www.autosparks.co.uk/product_info.php?products_id=2492

For anyone who may wish to buy a 2.6 I have one from a 59 Ford Zephyr. Engine is all there and so buyer would be able to build to suit AC. Incidentally, car comes with the engine. Would make a really good rally car.

Gentlemen, thanks so very much! Two very good sources!
   
   Will

Is the gasket pictured original or a made to fit piece?

Tivvy's Autokraft is a good place to enquire 434 799 5629
   also Jim Feldman who is US AC membership registrar at 503 643 3225

Peter,
   
   Coker Tire has the 550-16 and the 185R16
   
   Prices vary depending on manufacturer! They are a great source!
   
   http://store.coker.com/
   
   Will

I have a 64 3000. Maybe I could bring it by and place on your lift?

Keith, thanks so much! I will call him

If you can get your hands on a copy of Rinsey Mills book on AC Ace, Aceca & cobra it may be of some use. Try Amazon! If you would like I could scan an owners manual page regarding the steering.

wheel camber, 1-2 degree positive; wheel toe-in on rim, 1/16 in; castor angle, 5 degree; king pin inclination, 9 degree ( per Rinsey Mills book )

Bishop Cam steering box or rack and pinion?

Who would be a good source to restore gauges for my AC Ace?

Where is a good source for wiring kit? Also, is there anything is production of a similar nature that could be adapted to an AC Ace?

Any advice who to use for complete interior kit for AC Ace in the US or UK?