Text only | Text with Images

AC Owners Club Forum

AC Owners Club Forum => Mk IV, Superblower, CRS and other Continuation Cars Forum => Topic started by: Flyinghorse on May 25, 2018, 22:40:01

Title: Tremec T5 tail shaft bushng stepped drift required
Post by: Flyinghorse on May 25, 2018, 22:40:01
I am fully rebuilding my Tremec WC T5 gearbox and wondered if anyone has available a stepped drift for removing / replacing the tail shaft bushing?
Please drop me an email. Otherwise i will have one made but thought i would check.
Regards
Graham









Title: Re: Tremec T5 tail shaft bushng stepped drift required
Post by: Flyinghorse on May 26, 2018, 16:19:48
Task now completed using drift to remove old bush and new installed using old bush " good side" and   UJ spline and lots of care.
Title: Re: Tremec T5 tail shaft bushng stepped drift required
Post by: B.P.Bird on May 28, 2018, 10:03:30
Well done Graham - ingenuity is alive and well......
Text only | Text with Images