Adapter plates rear ford calipers ?

[westcott]

Looking for 2 adapter plates to mount the Ford calipers to the rear uprights to replace the Peugeot calipers.

A drawing would be helpfull as well.

[Flyinghorse]

Uwe,
Any reason you're switching to Ford calipers? I ask as I recently overhauled 2 rear Peugeot ( Girling) and if it's the plastic bracket that's the issue I got a 3D printed replacement made  by a friend and have the 3D file.
Graham

[westcott]

Graham, the problem is with the piston availability. It's getting hard to find the pistons and all the small parts even 1 km from the french border where i live now. I did the caliper rework this year but want to have an alternativefor the future.

The guys from Autokraft missed to  do a cut out on the right rear upright which was the reason for a allways damaged dust seal since the first day AK 1106 startet its journey.

Thanks for the info about the plastic part print file. I will check with the french part sources here and come back if necessary.

[westcott]

The missing cut out caused dust seal and caliper damage.

[westcott]

Needed to cut out the RH upright to avoid future damage. This was normally done at Autokraft to fit the Peugeot calipers.